Smart WiFi + GSM Home Security Alarm System with Touch Keypad & RFID

The Smart WiFi + GSM Home Security Alarm System is a complete and reliable security solution for homes, offices, and shops. With dual connectivity (WiFi + GSM), the system stays active even during internet outages, ensuring continuous protection.

The system features a responsive touch keypad panel for easy operation and supports RFID cards for quick access without entering a PIN. A dedicated SOS emergency button allows instant alerts during emergencies.

Each box includes a complete starter security kit, making installation quick and hassle-free. The system is fully expandable, allowing you to add extra motion sensors, door/window sensors, sirens, and other accessories according to your security requirements.

Controlled via the Tuya / Smart Life app, users receive real-time alerts, arm/disarm remotely, and monitor their property from anywhere.

What’s Included in the Box

• 1 × Motion Sensor (PIR)

• 1 × Door / Window Sensor

• 2 × Remote Key Fobs

• 2 × RFID Tags

• 1 × Siren

• 1 × Smart Alarm Control Panel

🔹 Additional sensors and accessories can be added according to requirement.

A complete alarm system in one box. This is a full home and small business security kit rather than a single component. It includes the control panel with touch keypad, door and window sensors, motion sensors, remote controls, RFID tags, and a siren. For most homes and shops it is everything needed to have a working alarm on the same day, without specifying and matching parts separately.

Why dual network matters in Pakistan. The panel communicates over both WiFi and GSM, and that redundancy is the single most important feature for Pakistani conditions. WiFi gives you app control and instant notifications while your internet is up. GSM uses a mobile SIM, so alerts still reach you by call and SMS when the internet is down, the router is off during load shedding, or the broadband line is cut. An alarm that only works over WiFi is an alarm that stops working at exactly the moment it is most needed. This is the question to ask about any system you are comparing.

Who this suits. Houses and apartments, shops and small showrooms, offices, clinics, and small warehouses. It is aimed at anyone who wants proper intrusion detection without the cost and disruption of a hardwired professional installation. If you rent, or if the building is finished and you would rather not chase cables through walls, a wireless kit is the practical answer.

How arming and disarming works day to day. The touch keypad on the panel accepts a PIN. The RFID tags let family members or staff arm and disarm by tapping, which is faster and avoids a code being watched or shared. Remote controls work from outside the door, useful for arming as you leave. Most households settle into using the remote or tag daily and the keypad rarely.

Home mode and away mode. Away mode arms everything. Home mode arms perimeter sensors such as door and window contacts while leaving internal motion sensors inactive, so you can move around the house at night with the doors and windows still protected. Setting this up properly is what makes an alarm liveable rather than something the family switches off after a fortnight.

Planning where sensors go. Cover entry points first. Door contacts on every external door, contacts on accessible windows, and a motion sensor covering the hallway or landing that an intruder must cross to reach the rest of the property. A sensor in a room nobody would enter without passing another sensor first adds little. Think about the route someone would take, not the number of devices.

Avoiding false alarms. The fastest way to have an alarm disabled is repeated false triggers. Do not aim motion sensors at windows with direct sunlight, at air conditioner outlets, or at curtains that move in a draught. If you have pets, discuss placement with us before installing, since ordinary motion sensors will detect a cat crossing a room. Mounting height and angle matter more than sensitivity settings.

Battery and power behaviour. The panel has backup battery support so it keeps working through load shedding. Wireless sensors run on their own batteries and report low battery through the panel and app, so replacement is planned rather than discovered after a failure. Check the panel battery annually as a habit, in the same way you would a smoke alarm.

The SIM card, and what to check. GSM alerting needs an active SIM in the panel with credit or an active package. Prepaid SIMs that expire from inactivity are a common cause of a system that appears to work until the day it needs to call you. Set a reminder to check the SIM periodically, or use a package that does not lapse.

Expanding the system later. Additional door contacts, motion sensors, remotes, and sirens can be added, so a kit bought for a house can grow with an extension or be extended to cover a garage or outbuilding. Buying a kit does not lock you into its original size.

Where a wireless kit is not the right answer. Being straightforward about this: for a large commercial premises, a factory, or a site needing many zones with central monitoring, a hardwired panel with wired detectors is more appropriate and more robust. Wireless kits are excellent for homes and small businesses. Tell us the size and type of your premises and we will say honestly which you need.

Does it work without internet? Yes. GSM alerting over the mobile network continues independently of your broadband, which is the main reason to choose a dual network panel.

Will it keep working during load shedding? The panel has backup battery support and sensors are battery powered, so detection continues. GSM alerts still reach your phone. WiFi app control resumes when your router is powered again.

How many sensors are included? The kit ships with a starter set of sensors, remotes, RFID tags and a siren. Contact us for the exact current contents, as kit configurations vary between batches.

Can I install it myself? Yes. Wireless sensors mount with screws or adhesive and pair with the panel, so no cabling or electrician is required. We can walk you through setup on WhatsApp.

Is it suitable for a rented property? Yes, and that is one of its strengths. Nothing is wired in, so it can be removed and reinstalled when you move.

Buying from ZZ Marts. In stock at our Karachi (Saddar) and Lahore stores with nationwide delivery, supplied by Zam Zam Traders, trading in security equipment since 2005. We also stock additional wireless sensors, GSM and PSTN alarm panels, perimeter beam sensors, sirens, and full wired alarm systems for larger premises. Tell us how many doors and rooms you need covered and we will confirm whether this kit is the right size or whether you need something different.