Touchless Exit Buttons in Pakistan: The Complete Buyer's Guide

A touchless exit button is a contactless door-release switch that unlocks a door when you wave your hand near it, without physically pressing anything. In Pakistan, you can buy touchless (no-touch) exit buttons, push-to-exit buttons, and break-glass emergency releases from ZZ Marts, a security-electronics retailer operating since 2005 with stores in Karachi (Saddar) and Lahore and nationwide delivery. This guide explains how each type works, where to use it, how it wires into your access control system, and roughly what it costs — so you can pick the right exit device for your door.

What is an exit button and why does every access-controlled door need one?

On an access-controlled door, the outside is locked by an electromagnetic lock (maglock) or electric bolt, and people entering use a card, PIN, or fingerprint. But people leaving from the inside need a simple, reliable way to release the lock — that is the job of the exit button (also called a door-release button or “request to exit” switch). Press or wave at it, the lock releases for a few seconds, and the door opens. Without an exit button, anyone inside would be locked in, which is both inconvenient and a serious safety risk.

Exit buttons are a core part of any access control system, and they pair directly with magnetic and electric door locks.

Touchless (no-touch) exit buttons

A touchless exit button uses a built-in infrared sensor to detect your hand a few centimetres away, releasing the door without any physical contact. It became popular for hygiene reasons — nobody has to touch a shared surface — and because there are no moving parts to wear out or jam, it tends to last longer than a mechanical button.

Best for: hospitals, clinics, labs, clean rooms, offices, restaurants, and any high-traffic door where hygiene or durability matters. Look for a model with an adjustable sensing distance and a clear LED indicator, and check whether it is designed for indoor use or a weather-resistant version for semi-exposed doors.

Push-to-exit buttons

The push-to-exit button is the classic, most economical option: a simple button you press to release the door. They come in plastic or stainless-steel metal housings (metal lasts longer in busy commercial settings) and in different sizes and shapes, including slim single-gang plates and larger emergency-style buttons.

Best for: offices, shops, apartment buildings, and general commercial doors where cost and simplicity matter most. Browse the full range of exit push buttons to compare housings and sizes.

Break-glass and emergency door releases

A break-glass unit is an emergency release: in a fire or power failure, someone breaks (or presses) the unit to instantly cut power to the lock and free the door. These are important for fire-exit doors and any door where a guaranteed manual escape route is required by safety rules. Many models are resettable, so you do not have to replace the glass after every use.

Best for: fire-exit doors, stairwells, and any door that must fail-open in an emergency. These work alongside your fire and burglar alarm systems as part of a complete safety setup.

How to choose the right exit device

Match the device to the door's job:

Hygiene or high traffic? Choose a touchless no-touch button. Budget or standard office door? A metal push-to-exit button is reliable and affordable. Fire exit or emergency route? Add a break-glass release so the door frees instantly in an emergency. Many sites use a combination — for example, a touchless button for everyday exit plus a break-glass unit for emergencies on the same door.

Also check the wiring type. Most exit buttons offer NO (normally open) and NC (normally closed) terminals so they can connect to virtually any access controller or maglock. A maglock is fail-safe (it unlocks when power is cut), so the exit button simply interrupts power to release the door. If you are unsure which terminals your controller needs, our staff can help you match the button to your existing system.

Exit button prices in Pakistan

Prices depend on the type and build quality. At ZZ Marts, stainless-steel push-to-exit buttons start at Rs 1,499, key-operated door release switches are around Rs 1,999, and touchless infrared buttons run Rs 1,999–3,699 because of the sensor. For current prices and stock, check the exit push buttons category, or message our Karachi and Lahore teams on WhatsApp for a quote on bulk or project orders.

Exit buttons — frequently asked questions

What is a touchless exit button?
A touchless (no-touch) exit button releases a door lock when you wave your hand near its infrared sensor, without pressing anything. It is used for hygiene and durability on access-controlled doors in places like hospitals, offices, and restaurants.

How does an exit button connect to a magnetic lock?
An exit button wires between the power supply and the lock using its NO or NC terminals. When pressed or triggered, it briefly cuts power to the maglock, which is fail-safe and unlocks, releasing the door for a few seconds.

What is the difference between a push-to-exit button and a break-glass release?
A push-to-exit button is for everyday exit — you press it to leave. A break-glass release is for emergencies — it instantly and reliably cuts power to the lock in a fire or power failure so the door fails open.

Where can I buy exit buttons in Pakistan?
You can buy touchless, push-to-exit, and break-glass exit devices from ZZ Marts — the trading name of Zam Zam Traders — operating since 2005 with stores in Karachi (Saddar) and Lahore and nationwide delivery, with free delivery on orders over Rs 5,000.

Related: Explore our exit buttons and door release switches, complete access control systems, and magnetic and electric door locks.