No products in the cart.
Every alarm system needs something loud. Sensors and control panels detect a break-in, a fire, or an intruder at the boundary — but it is the alarm siren that actually scares them off and alerts everyone nearby. This guide explains the main types of security alarm sirens and bells used in Pakistan, the difference between 12V and 24V units, where each one fits, and how to choose the right one for a home, shop, or factory. Everything here is stocked at ZZ Marts, with stores in Karachi and Lahore.
What an alarm siren does
An alarm siren is the output device of a security or fire system. When a sensor is triggered, the control panel sends power to the siren, which produces a loud sound (and often a flashing light) to warn people and drive off an intruder. A good siren is loud enough to be heard across a building or compound and rugged enough to survive weather and tampering. Most run on 12V or 24V DC so they can be wired straight into an alarm panel or battery backup.
Types of alarm sirens and bells
Electronic sirens (12V / 24V)
The most common type for homes, shops and offices. These are compact, wired, and pair with any burglar alarm panel. Our 626 security siren is a popular 12V/24V wired siren that is loud, affordable and easy to install.
Motor sirens (high-power)
For factories, warehouses, farms and large compounds you need serious volume. Motor sirens use a spinning rotor to push out a much louder, longer-range wail. The MS-190 industrial electric siren (12V/24V/220V) and the MS-290 motor siren are built for these high-power jobs.
Strobe and flasher sirens (sound + light)
Adding a flashing light makes an alarm impossible to ignore, day or night, and helps guards and neighbours locate the source. The 103 emergency siren combines a loud sound with bright blue/red flashing for maximum attention.
Alarm bells
Traditional alarm bells are still widely used for fire alarms, factories and schools, where a clear, familiar ringing tone signals evacuation or shift changes. Browse the full sirens and alarm bells range.
12V vs 24V — which alarm siren do you need?
The voltage should match your alarm panel or power supply. 12V sirens are the standard for most home and shop burglar alarms and small battery backups. 24V sirens are common in larger commercial and fire alarm systems, where the higher voltage drives a louder output over longer cable runs. Industrial motor sirens often also offer a 220V mains option for permanent installations. If you are unsure, check what your control panel outputs and match it.
Where alarm sirens are used
- Home: a 12V electronic siren wired to the burglar alarm panel, usually mounted high on an outside wall.
- Shop or office: an electronic siren plus a strobe so alerts are seen and heard.
- Factory or warehouse: a high-power motor siren for volume across a large area.
- Boundary or farm: a loud motor siren paired with beam sensors along the perimeter.
- Fire safety: alarm bells or sounder-strobes on the fire alarm circuit for clear evacuation signals.
How to choose the right siren
Match three things: the voltage to your panel (12V, 24V or 220V), the loudness and range to the size of your building or compound, and the environment (choose a weatherproof metal-body siren for outdoor and industrial use). A siren is only as useful as the system behind it, so pair it with a good burglar alarm system and, for entry points, an access control system.
Buy alarm sirens and bells in Karachi & Lahore
ZZ Marts (Zam Zam Traders, established 2005) stocks electronic sirens, motor sirens, strobe sirens and alarm bells for every use, with walk-in stores in Karachi and Lahore and delivery across Pakistan. Not sure which siren suits your setup? Our team can help — start with the sirens and alarm bells range.
Frequently asked questions
How loud is a security alarm siren?
Electronic sirens are loud enough to fill a house or shop, while industrial motor sirens are far louder and carry across a whole compound or factory. For outdoor and large areas, choose a motor siren.
What is the difference between a 12V and 24V siren?
The voltage should match your alarm panel. 12V sirens suit most home and shop burglar alarms; 24V sirens are common in larger commercial and fire systems and drive a louder output over longer cables.
What is a motor siren?
A motor siren uses a spinning rotor to produce a very loud, long-range wailing sound. It is used in factories, warehouses and large compounds where an electronic siren is not loud enough.
Can I add a flashing light to my alarm?
Yes. Strobe or flasher sirens combine sound with a bright flashing light so the alarm is seen as well as heard, which is useful at night and for locating the source quickly.
Which siren works with my alarm panel?
Match the siren voltage to your panel’s output (usually 12V or 24V). Industrial motor sirens often also offer a 220V mains option for permanent installations.
