Wide Screen Compatibility: Supports large TVs from 32″ to 80″.
Double Arm Full Motion Design: Extra strength with extended swivel and reach.
Swivel & Tilt Adjustment: Left-right swivel and tilt for perfect viewing angles.
High Load Capacity Support: Designed for heavy LED, LCD, and Smart TVs.
Heavy-Duty Steel Construction: Reinforced double-arm structure for maximum stability.
Space-Saving & Flexible: Extends from wall when needed and folds back neatly.
Only logged in customers who have purchased this product may leave a review.
The 32″–80″ Double Arm TV Wall Mount is a heavy-duty full motion wall bracket engineered for large and heavy flat-screen TVs. Featuring a strong double-arm mechanism, this mount provides superior stability while allowing extended reach, smooth swivel, and tilt adjustments for flexible viewing.
This wall mount is ideal for large living rooms, offices, conference rooms, restaurants, showrooms, halls, and commercial installations. The double-arm design distributes weight evenly, making it safer and more durable than single-arm mounts—especially for bigger screens.
Compatible with standard VESA mounting patterns, this bracket supports modern LED, LCD, and Smart TVs. Its adjustable arms allow you to pull the TV away from the wall for angled viewing and push it back when not needed, saving space while maintaining flexibility.
Built with reinforced heavy-duty steel, the 32″–80″ double arm wall mount ensures long-term reliability, secure installation, and professional-grade performance.
Double arm, full motion, for large screens that need to move. This bracket takes televisions from 32 to 80 inches and uses a double arm rather than a single arm. That construction is the reason to choose it: two arms share the load and control the movement, which is what allows a large heavy screen to be pulled out from the wall, swivelled, and tilted without sagging or feeling unstable.
Why double arm matters at this size. A single arm bracket holding an 80 inch television at full extension puts enormous leverage on one pivot point. Over time that produces droop, where the screen no longer sits level, and movement that feels loose. A double arm distributes that load across two points, which is why heavy screens and full motion brackets are almost always specified together. If you intend to actually move the screen regularly rather than set it once, this is the construction you want.
What full motion actually gives you. The screen pulls away from the wall, swivels left and right, and tilts up or down. In practice that means watching from the sofa and from the kitchen doorway, angling away from window glare in the afternoon, and pulling the screen out to reach cables behind it without dismounting the whole thing. That last point is worth more than people expect, because on a fixed bracket adding a device six months later means taking the television off the wall.
The wall is the part that decides everything. This is the check that matters most and the one people skip. Solid concrete or solid brick will carry this bracket with correct anchors. Hollow block, which is common in Pakistani construction, needs anchors designed for hollow material and careful placement. Gypsum or drywall partitions cannot carry a large television on a full motion bracket under any circumstances unless there is timber or steel structure behind, and fixing to the board alone will eventually pull out, usually with the television attached. Establish what your wall is made of before buying, and if you are unsure, ask your installer to check before drilling.
Extension multiplies the load on the wall. A screen held flat against the wall pulls mostly downward. The same screen extended out on its arms pulls outward as well, and that leverage on the wall anchors is far greater. This is why a bracket that seems fine when first fitted can loosen over months of being pulled in and out. Use the correct anchors for your wall type and do not economise on them, because the fixings are the cheapest part of the installation and the only part holding your television up.
Check weight, not just screen size. Size is the headline but weight is what the bracket carries, and they do not track reliably. A 65 inch commercial panel often weighs more than a 75 inch domestic television. Find the weight on the back of your set or in the manual and confirm it sits inside the bracket rating with margin rather than at the limit. Send us the make and model and we will check for you.
VESA patterns at this size. Large screens commonly use 400x400mm, 600x400mm, or larger. Measure the square of holes on the back rather than assuming from the screen size, because a mismatch here means the bracket physically cannot attach. Adapter plates exist for unusual patterns and we can advise.
Cable management with a moving screen. Leave enough slack for the arms to reach full extension, then secure the cables so they follow the arm rather than hanging. Too little slack and pulling the screen out strains the connectors at the back of the television. Too much and you have a loop hanging behind. Test the full range of movement before finally securing anything.
Two people for installation. Lifting a large television onto a bracket at height is not a one person job, and attempting it alone is how screens get dropped. Plan for two people, and a stable platform rather than a chair.
Choosing between our wall mounts. This 32 to 80 inch double arm for large screens where you want genuine full motion. Our 26 to 55 inch and 14 to 55 inch swivel and tilt brackets for mid size televisions. The 14 to 42 inch bracket for small screens. If your screen sits near the boundary between two brackets, choose the heavier duty one, particularly if you intend to move it often.
Will it hold my 75 inch television? Check the weight rather than the size, and send us the make and model so we can confirm.
Can it be fitted to a drywall or gypsum partition? Not safely unless there is timber or steel structure behind it. Tell us your wall construction and we will advise.
How far does it extend from the wall? Full motion brackets extend substantially. Tell us the space you have and we will confirm dimensions for the model in stock.
Why choose double arm over single? Two arms share the load and resist droop at full extension, which matters on heavy screens and on brackets you actually move.
Buying from ZZ Marts. In stock at our Karachi (Saddar) and Lahore stores with nationwide delivery, supplied by Zam Zam Traders, trading since 2005. We also stock 14 to 42, 14 to 55 and 26 to 55 inch wall brackets, ceiling mounts, mobile floor stands, monitor arms, and VESA adapter plates. Tell us your screen size, weight, and wall construction and we will confirm the right bracket and the correct anchors before you order.
Supported Screen Size: 32″–80″
Load Capacity: Up to 60–70 kg
Mount Type: Wall mount
Arm Type: Double arm (full motion)
Movement: Swivel, tilt, extension
Material: Heavy-duty reinforced steel
VESA Compatibility: Standard VESA patterns
Installation: Wall mounted
Q: Is this mount suitable for very large TVs?
Yes, it is designed specifically for large and heavy TVs up to 80 inches.
Q: What is the benefit of a double arm mount?
Double arms provide extra strength, better weight distribution, and extended reach.
Q: Can the TV be moved left and right?
Yes, it supports wide swivel movement.
Q: Does it support Smart and LED TVs?
Yes, compatible with LED, LCD, and Smart TVs.
Q: Is it safe for long-term use?
Yes, the reinforced steel construction ensures maximum safety and durability.
Large home living rooms
Office & conference halls
Restaurants & cafés
Showrooms & shops
Waiting areas & receptions
Commercial and public spaces
Reviews
There are no reviews yet.